not a matt, obviously, but hoping this guy is gonna clean up nicely for me.
does anyone know what year this might be from?
this is my first attempt at a refinish so any advice on the below plans would be useful:
someone has done most of the hard work in removing the finish from the back and front. just need to do the side, edges and some fine sanding. i'm sure there's a full days work in that anyway.
the grain is showing beautifully. i read that a coat of shellac prior to staining might help bring this out even more (?)
planning on just giving a simple, non-gloss stain finish (walnut?)
2 or 3 coats applied by rag, then finish with a coat of tung oil.
reckon that'll be ok?
apart from the finish, this is a beauty! (AU$120 on ebay)
the frets are super low but not buzzing at all. playing nicely as it came.
the wear on the fretboard is heavy, but looks pretty cool i say.
the electrics are working and the pickups sound really nice - very warm.
there is a crack in the pickguard, next to the neck pickup. (does anyone know if a fender pickguard will match?)
missing one volume knob and the switch tip.
any advice appreciated!
otherwise, watch this space...